Phone: +977-9860563506, +977-9860308141, +977-9841223274 | Email: slighttech@gmail.com

4 Ch Remote With Relay Receiver

  • Category : Robotics And Electronics
  • Sub Category : Sensor & Modules
  • Status : In Stock

Ask For Price

Product Details

Specification:

1. working voltage: DC 12V

2. Static current: less than 6mA

3. the receiving sensitivity is not less than -105dBm

4. working frequency: 315MHz

5. Remote control distance: in theory, it is 100 meters. but in reality, it is about 15 meter ~ 30 meters.

6. Cover size: 60mm * 45mm * 30mm (L * W * H)
Board size: 58mm * 43mm
7. Relay Capacity: 10A 250VAC / 10A 30VDC

Three Working mode:

Momentary: Press and hold->On; Release->Off (defauft.)

Toggle/Self-Lock: Press->On; Press again->Off

Inter-Lock: Press->On; Press other button->Off

Change The Working Mode & link the remote

1) Momentary working mode

(still hold) LED flash one time, release the button. the LED indicator light up about about 5 seconds(still hold), then LED light off Step 1: Long press the button of receiver (hold) & close the remote and receiver, press any key of the remote, the LED of receiver flash several times, the linking is finished. Step 2: Press the button of receiver again about 2 seconds, the LED light up, release the button.

2) Self-lock working mode

(still hold) LED flash two times, release the button.à the LED indicator light up about about 5 seconds(still hold), then LED light off Step 1: Long press the button of receiver (hold) & close the remote and receiver, press any key of the remote, the LED of receiver flash several times, the linking is finished. Step 2: Press the button of receiver again about 2 seconds, the LED light up, release the button.

3) Inter-lock working mode

(still hold) LED flash three times, release the button.à the LED indicator light up about about 5 seconds(still hold), then LED light off Step 1: Long press the button of receiver (hold) & close the remote and receiver, press any key of the remote, the LED of receiver flash several times, the linking is finished. Step 2: Press the button of receiver again about 2 seconds, the LED light up, release the button.